Where yah been?

Blog is such an ugly word

To answer the thoroughly ungrammatical question above, I’ve been busy building the Machining Business News website. While a web log – aka “blog” – is one way to get my information out to the masses, I find it takes as whole lot of monkeying around with HTML code and debugging to get things to look the way I want, then there’s duplicating it over at Blogger.

Too, I’ve never liked the word “blog.” It’s an affront to both the eye and ear. Over at MBN, I can call it a news and information site. Much more classy and much less likely to offend my effete sensibilities.

To add to the basic problems such as those in constructing this column, I’m uncomfortable mixing opinion, news, new products, and other features in a single posting. Thus, the move to Machining Business NewsMBN – website. There, everything is nicely compartmentalized and much more organized.

This also gives me better search engine exposure since “machining” and “business” both better describe what I offer than my punny column name, “Milling Around.”

I’m sorry to say pickin’s will still be pretty slim for the next few days, but don’t despair. Once the site is complete, it will offer deeper and much more organized information to give machine shops the advantage they need to succeed in these tough times.



Milling Around is affiliated with
MachineShopWeb.com
Your Guide to Machine Shop Products, Shops and Services


It’s Blogger-iffic!
Milling Around is now echoed on Google Blogger
at www.MillingAroundUSA.Blogger.com





–30–

Add to Technorati Favorites Top Blogs
Technology
Blog Search Engine Technology Blogs - BlogCatalog Blog Directory


Mission(ary) Positions



Milling Around is affiliated with
MachineShopWeb.com
Your Guide to Machine Shop Products, Shops and Services


It’s Blogger-iffic!
Milling Around is now echoed on Google Blogger
at www.MillingAroundUSA.Blogger.com




It’s not that hard

For a while, back at the turn of the century, it seemed awfully important to companies to generate mission statements. Why? It’s hard to tell. I think a lot of the need was produced by middle managers who read too many management books.

What is a mission statement? It’s a short – well, it’s supposed to be – phrase that capsulizes what a business, or business unit, is supposed to be doing. How hard could that be? Wouldn’t a business know its . . . well . . . business? Not if you read some of those things.

They’re usually put together by committees of people who have, or are working on, MBAs. They may know the theory of business, but in most cases, they are just a shade beyond pre-verbal. Instead of boiling-down the essence of their work into a 25-words-or-less statement, most of these people come from the “more is better” school of writing, especially if they can use the word “utilize.”

If they can’t think of the correct word, they reach into their limited vocabulary and cobble together portmanteau hyphenated words, like “war-fighter” instead of “soldier” or “warrior.” They think it makes them sound erudite.

In my days as a tech writer for National City Bank, a section of the IT department came up with a 50-word mission statement that included such clinkers as “thought-leader.” What the heck is that?

The whole mission statement fad became so popular that the Dilbert comic strip had, for a time, an online mission statement generator that produced such vacuous statements as

“Our goal is to efficiently utilize inexpensive data while continuing to professionally leverage other’s excellent intellectual capital in order to solve business problems”

“We have committed to synergistically fashion high-quality products so that we may collaboratively provide access to inexpensive leadership skills in order to solve business problems”

“It is our job to continually foster world-class infrastructures as well as to quickly create principle-centered sources to meet our customer’s needs”

“Our challenge is to assertively network economically sound methods of empowerment so that we may continually negotiate performance based infrastructures”

Sadly, the parodies sounded much like those produced by the corporate drones.

But, a true statement of a business’ goals should be simple. Feel free to use these:

“Do good, avoid evil.”

“We’re here to produce good stuff for money.”

“Keep the customers satisfied.”

See, it’s not that hard.




Unilock is the key
The Unilock Starter Kit from Stevens Engineering and BIG Kaiser

The Unilock Starter Kit from Stevens Engineering and BIG Kaiser

Stevens Engineering Inc. and BIG Kaiser Precision Tooling Inc. introduce the Unilock Starter Kit. The kit lets users plug the components into their production cell when it supports a Stevens Engineering mounting grid pattern to eliminate setup time. The kit contains universal pallets that lets the user attach and detach positioning and clamping components or workpieces. Starter Kits support the Stevens Engineering grid pattern with other grid spacing available upon request. Unilock can be used to exchange work pieces in excess of 5,000 lb, however these kits are designed for use with small parts and fixtures that can be shuttled by hand or robot from one process to another. For information about Stevens Engineering products, call 800-635-0657, or e-mail the company. For more information about BIG Kaiser Unilock Starter Kits or other products, call 847-228-7660, e-mail BIG Kaiser.



Beveled edges with a waterjet
The OMAX A-Jet waterjet nozzle cuts beveled edges

The OMAX A-Jet waterjet nozzle cuts beveled edges

OMAX introduces its A-Jet, which cuts beveled edges at angles determined by the machine operator or part program. Controlled by the company’s proprietary Intelli-MAX software, the A-Jet adds two motion axes that allow nozzle tilting of 0 to 60° from the vertical position. The component can be used to produce beveled edges when cutting countersunk holes. It also can cut parts with complex geometries. The accessory features a fixed focal point design, where the X-, Y-, and Z-axes need not be moved as the head tilts. The A-Jet is supplied with a diamond-integrated MAXJET 5i nozzle. It has large-diameter tubing with minimal pressure loss, for the use of large high-power nozzles. For more information, call Sandra McLain at 800-838-0343, and tell her you saw this at Milling Around.



Two-axis table for laser machining
The Steinmeyer LT490-450-EDLM 2-axis stage system for laser machining

The Steinmeyer LT490-450-EDLM 2-axis stage system for laser machining

Steinmeyer, Inc. offers its LT490-450-EDLM 2-axis system for laser machining as well as other extended travel applications. It’s an enclosed 2-axis stage with 450mm stroke. It contains iron-core linear motors, linear guideways, linear measuring system and E-chain cable carriers. Maximum speed is 500mm per second with acceleration of 5m/s². Accuracy in each direction is 1µ with ±0.5µ repeatability. For further information, call 781-273-6220.



Cam levers for workholding
Cam levers by Kipp and Imao from Fixtureworks

Cam levers by Kipp and Imao from Fixtureworks

Fixtureworks has just released a series of cam levers developed by Kipp, a manufacturer of manual operating elements and Imao, a producer of fixturing clamps, and machine tool accessories. The cam levers are designed to provide ergonomic clamping of part fixtures. There is a selection of 17 different handles with mounting options, sizes, profiles and clamping force ratings. The levers are outfitted with either internal female threads or with male threaded studs for attaching to fixture bases, plates, tombstones, machine tables, or other workholding elements. Once the preliminary assembly and tightening of the threaded elements is completed – like traditional clamping fasteners – the cam action handles allow for quick final clamping or unclamping without the use of tools. The cam lever is pushed downward with minimal hand force, which generates approximately 200 to 1,800 lb of clamping force, depending upon the size range of the lever. Forces are created with as little as 0.050″/0.060″ lever travel in the Kipp units, and 0.07″ to 0.129″ travel with the Imao handles. To unfasten, the handle is pulled up which releases the clamping pressure, allowing part removal for unloading and loading. In addition to male or female thread mounting options, the cam levers come in inch and metric internal threads, plus inch and metric external threaded selections. The Imao levers have female threaded bushings only, with thread sizes from M4 to M8 for mounting to fixture bases. Kipp cam lever handles are constructed from cast aluminum or stainless steel, while the Imao levers are fabricated from steel with black oxide finish; a setscrew and internal pad are included to help prevent the levers from backing off and loosening during operation. For more information, call 586-294-1188.



Honing in on smoothness
Sunnen's TC tool for honing small two-stroke cycle engine cylinders

Sunnen's TC tool for honing small two-stroke cycle engine cylinders

Sunnen’s TC tool is custom-engineered for honing small two-stroke cycle engine cylinders to solve problems such as blind, ported, and tapered bores, and hard surface coatings, such as Nikasil and chrome plating. The tool easily fractional micron – 0.00004″ – accuracies and specific surface finishes for increased power production, fuel efficiency, reduced emissions and engine durability. Equipped with metal-bond superabrasives, TC tools use customized abrasive mounting, that holds up to a dozen stone segments of various lengths. Strategic placement of the abrasives produces roundness and a consistent finish from top to bottom in blind bores. Each tool is tuned to the application based on length and number of abrasives that lets the tool bridge across ports, minimizing washout of the port edges to maintain ring seal for increased power and engine life. For additional information, call 800-325-3670, or e-mail Sunnen.
–30–

Add to Technorati Favorites Top Blogs
Technology
Blog Search Engine Technology Blogs - BlogCatalog Blog Directory


Opinion and news for 9/4/2009



Milling Around is affiliated with
MachineShopWeb.com
Your Guide to Machine Shop Products, Shops and Services


It’s Blogger-iffic!
Milling Around is now echoed on Google Blogger
at www.MillingAroundUSA.Blogger.com




How are you going to ruin the wetlands when you’re up to your keister in endangered species?

I was crossing the street the other day, not looking where I was going when I was run over by a bus. Ouch.

My legs were crushed to strawberry jam, so I wasn’t feeling in tip-top shape. Thankfully, a charismatic African-American politician was walking by and came to my aid. He took my pulse and laid a hand to my forehead to see if I had a fever.

“You’re running a little hot. I’d better take care of that,” he said.

He took my wallet from my ruined pants and ran to the nearby drugstore. He came back with a bottle of Aleve and popped one into my mouth before I could tell him that I was allergic to naproxin.

I also noticed that a third of what I had in my wallet was gone.

“I saw a homeless man in front of the drugstore,” the politician said. “He looked so sad that I used what was left from the $20 in your wallet to buy him a bottle of Night Train. We all have to share the burden of our fellow man’s misfortune, you know.

“I also took a 20 to get myself this nice FeatherBed™ goose-down, hyperallergenic, contour pillow. I’m sure you’ll feel better knowing that I’ll sleep much better tonight.”

While I was being lectured about my civil duty and how I couldn’t expect to eat as much as I wanted or could afford, or how I couldn’t heat or cool my home to make it as comfortable as I’d like, a second bus came by and ran over me again since the politician hadn’t moved me from the gutter. My shoes would never be the same. But, since it didn’t look like I’d be walking anymore, their usefulness was moot.

The slim gentleman then gave me a bill for the drycleaning his suit would need for the mess my blood made of his cuffs.

“Don’t worry about paying that now,” he said. “I’m sure your kids will be more than happy to pay that once they grow up and get jobs.”

He then thanked me for my service to him and went off to what I’m sure was a very important meeting in Washington. Eh, who needs legs nowadays anyway?

If you draw any parallels between my misfortune and the Washington’s monomaniacal focus on health-care to the expense of all of our domenstic troubles, you’re reading too little into this parable.

•       •       •

Well, rather than taint manufacturers with my opinions, I’ll concentrate on news today, rather than new products.





The state of manufacturing
The U.S. Census Bureau released some stats on Sep. 2, and the news, while not happy, jolly fun-time looks a bit better than it’s looked for a while. My analyses, for what it’s worth – it and $4 will get you a venté latté – are in italics.

According to the report, new orders for manufactured goods in July, up for five of the last six months, increased $4.6 billion or 1.3 percent to $355.5 billion

This followed a 0.9 percent June increase. Excluding transportation, new orders decreased 0.7 percent. Shipments, down 11 of the last 12 months, decreased $0.2 billion to $359.7 billion. This followed a 1.8 percent June increase.

Looks like a mixed message to me.

Unfilled orders, down 10 consecutive months, decreased $0.1 billion to $740.6 billion. This was the longest streak of consecutive monthly decreases since the series was first published on a NAICS basis in 1992.

Not a real sign of a robust economy flexing it’s economic muscles. More like how I feel getting out of bed in the morning: creaky, stiff, and slow.

This followed a 0.8 percent June decrease. The unfilled orders-to-shipments ratio was 5.95, down from six in June. Inventories, down 11 consecutive months, decreased $3.6 billion or 0.7 percent to $503.1 billion. This was the longest streak of consecutive monthly decreases since the March 2003 to January 2004 period, and followed a 1.1 percent June decrease. The inventories-to-shipments ratio was 1.40, down from 1.41 in June.

So, on the balance, it looks to me, a layman, like there’s some hope, but we may not have hit bottom yet.

New orders for manufactured durable goods in July, up three of the last four months, increased $8.2 billion or 5.1 percent to $169.0 billion, revised from the previously published 4.9 percent increase. This followed a 1.1 percent June decrease.

New orders for manufactured nondurable goods decreased $3.6 billion or 1.9 percent to $186.5 billion.

Shipments of manufactured durable goods in July, up two consecutive months, increased $3.4 billion, or 2 percent, to $173.3 billion, unchanged from the previously-published increase. This followed a 0.8 percent June increase.

Shipments of manufactured nondurable goods, down following two consecutive monthly increases, decreased $3.6 billion or 1.9 percent to $186.5 billion. This followed a 2.8 percent June increase. This decrease was led by petroleum and coal products, which decreased $2.7 billion or 7.2 percent to $34.3 billion.

I suppose the greenies will welcome the news that we’re using less oil and coal, thus sparing Mother Gaea, but to me it means were using less energy. Decreased energy usage means less production, and less production means less manufacturing, and less manufacturing means . . . well you get the picture, and it’s not a pretty one.

Unfilled orders for manufactured durable goods in July, down 10 consecutive months, decreased $0.1 billion to $740.6 billion, revised from the previously-published 0.1 percent decrease. This was the longest streak of consecutive monthly decreases since the series was first published on a NAICS basis in 1992 and followed a 0.8 percent June decrease.

Inventories of manufactured durable goods in July, down seven consecutive months, decreased $2.9 billion, 0.9 percent, to $313.7 billion, revised from the previously-published 0.8 percent decrease. This followed a 1.5 percent June decrease.

Inventories of manufactured nondurable goods, down 11 consecutive months, decreased $0.7 billion or 0.4 percent to $189.4 billion. This followed a 0.4 percent June decrease. Plastic and rubber products led the decrease, down $0.4 billion, 2 percent, to $18.9 billion.

By stage of fabrication, July materials and supplies decreased 1.8 percent in durable goods and increased 0.7 percent in nondurable goods. Work in process decreased 0.1 percent in durable goods and 0.8 percent in nondurable goods. Finished goods decreased 1.1 percent in durable goods and 1.0 percent in nondurable goods.





Yeah, but what’s it mean?
Okay, there were a lot of stats above, some seemed to be pointing to a recovery, others showing we haven’t bottomed-out yet. I’ll leave it up to an expert to interpret what’s happening.

In this case, it’s Cliff Waldman, economist for the Manufacturers Alliance/MAPI, and his interpretation of the durable goods report for July.

The July report on durable goods demand squares with recent data in suggesting that the U.S. and global economies have entered a slow, if somewhat uncertain economic recovery.

Excluding the volatile transportation category, total new orders for long-lasting manufactured goods were up less than 1 percent, continuing a string of modest advances that are now leading to more positive manufacturing production activity as inventories are brought into line with the still weak realities of market demand.

The mixed industry data for July, with primary and fabricated metals demand showing solidly positive activity but machinery demand suffering a sizable decline, indicates that factory activity will, for a time, likely return to the mixed situation that was indicative of the earlier months of this long recession.

Disappointingly, new orders for non-defense capital goods, excluding aircraft, a proxy for business equipment spending, slipped a bit after two strong months and remains more than 20 percent below year-ago levels.

U.S. and global activity has stabilized and financial conditions have improved modestly. But business decision-makers are going to have to see firmer and more consistent evidence of a return to the type of economic conditions that will produce solid profits before they are willing to more consistently strengthen their investment commitments and add capacity.





So, it looks like, at least to me, that we’ll be in a belt-tightening mode for at least another year.

–30–

Add to Technorati Favorites Top Blogs
Technology
Blog Search Engine Technology Blogs - BlogCatalog Blog Directory




Milling Around is affiliated with
MachineShopWeb.com
Your Guide to Machine Shop Products, Shops and Services


It’s Blogger-iffic!
Milling Around is now echoed on Google Blogger
at www.MillingAroundUSA.Blogger.com




Lots of new stuff

New products keep flooding in, so it’s about time I got on the stick and showed you some of them.

•       •       •

New Products


This takes the crankiness out of crankshaft grinding
The VTC 315 DS grinding machine from EMAG has two grinding wheels that machine the same bearing simultaneously.

The VTC 315 DS grinding machine from EMAG

The VTC 315 DS grinding machine from EMAG

It has a work headstock at the top, tailstock below, two compound slides, to the left and right a grinding spindle each with a CBN-compatible power rating of 30 kW and cutting speeds of 150 m/s. Also integrated are functions for gap control and automatic balancing. The work headstock does not have to be equipped with a special driver. It is equipped with two measuring sensors. The longitudinal alignment of the crankshaft is carried out with the aid of a pivoting length measuring device, whereas the diameters are checked with a type of in-process gauging head. Two integral dressing spindles with solid-borne sound sensors and a maximum speed of 15,000 rpm allow for simultaneous wheel dressing.




Shrink-fit
Kennametal introduces a shrink-fit toolholding system program for machining centers and multi-tasking machines. The program is in two lines.: the GP – general purpose – line of carbide, HSS, and steel shanks with clamping torques suitable for most general engineering, die and mold, automotive, and other machining tasks; and the HT – high torque – line for heavy roughing operations requiring higher clamping torque level, or for machining difficult-to-cut materials.

The Kennametal GP and HT shrink-fit toolholding systems

The Kennametal GP and HT shrink-fit toolholding systems

The HT line has a 30 to 50 percent higher clamping torque compared to GP line. For tolerancing hollow-shank (HSK) toolholders, taper is much tighter than that of any conventional 7/24 taper shanks. Due to the trend toward higher cutting speeds, all HSK-shrink fit toolholders have balancing quality of G2.5 at 25,000 rpm. The shrink-fit program also accommodates steep taper, BT, CV, and DV back-ends. Other factors in the program include a shrinking and cooling process that will not last more than 30 seconds, 3µm concentricity, slim profile for chucks for milling deep cavities, through-hole for coolant, and axial adjustment/ backstop. For more information visit the Kennametal website or call 800-446-7738




50 hp milliing
Mazak’s INTEGREX e-1060V/8 II Multi-Tasking Center provides turning and milling capabilities and features a milling spindle that tilts up to 150° for both horizontal and vertical machining operations, angle boring, and milling multiple faces. The machine also offers full simultaneous 5-axis cutting for large complex parts.

The Mazak INTEGREX e-1060V/8 II Multi-Tasking Center

The Mazak INTEGREX e-1060V/8 II Multi-Tasking Center

The e-1060V/8 II headstock features a 50 hp, 10,000 rpm milling spindle. It offers six different workholding pallets, including square or round pallet or chuck, which can be expanded to a Mazak Palletech system. With the 39.3″ square pallet, the machine accommodates workpieces to a maximum 49.2″ diameter and 49.2″ height, weighing up to 5,950 lb. Axis travels are 73.8″×41.7″×52.9″ on the X-, Y-, and Z-axes, with a rapid traverse rate of 1,653 ipm. The C-axis rotates at 0.0001° incrementally, while the B-axis travels 150°. It has an Intelligent Balance Analyzer, which aids in the machining of heavy parts by monitoring the distribution of fixture and part weight to determine if an unsafe, unbalanced condition exists. If so, it identifies the locations in need of adjustment to re-balance the load. It also will stop the table rotation if an unbalanced condition exists.




A real cut-up
ESAB Welding & Cutting Products introduces the PowerCut 900 manual cutting package. The 60-amp unit cuts ⅞” and severs 1¼”. It offers a Tool-less Quick Disconnect Torch that disconnects from the machine without the use of wrenches or special tools.

The ESAB Welding & Cutting Products PowerCut 900

The ESAB Welding & Cutting Products PowerCut 900

A digital readout display shows the exact pressure or amperage. The display also shows Help Codes to assist in troubleshooting minor errors. Blow Back Technology eliminates high frequency startups that can disrupt CNC controls and nearby computer systems. Additional features include a side-mounted automatic fan control; a built-in power line conditioner that protects against damage from power line noise and spikes, even with poor quality power; a torch wrap and spare parts kit holder; and a plug-and-play mechanized option that transform the manual cutting system into a mechanized system for a gantry machine. It comes with a three-year warranty and an option to purchase an extended warranty for a total of five years. For more information, visit the ESAB website, or call 1-800-ESAB-123




Engraved invitation

NCCS' NCL Version 9.7 multi-axis machining software

NCCS' NCL Version 9.7 multi-axis machining software

NCCS introduces engraving tools for multi-axis machining within NCL. The multi-axis machining software, NCL Version 9.7, gives users the ability to define, manipulate, and engrave annotations. Lettering can be machined onto the part using a simplified profile routine to follow the strokes of the defined font, and letters can be engraved onto planar and contoured surfaces using single or multiple depths. Users can change the settings for annotations, create annotation entities, modify existing annotation entities, and engrave annotation entities. For more information, visit the NCCS website
–30–

Add to Technorati Favorites Top Blogs
Technology
Blog Search Engine Technology Blogs - BlogCatalog Blog Directory


Shh! It’s a secret!  Aw, get over it



Milling Around is affiliated with
MachineShopWeb.com
Your Guide to Machine Shop Products, Shops and Services


It’s Blogger-iffic!
Milling Around is now echoed on Google Blogger
at www.MillingAroundUSA.Blogger.com





Mention reality TV shows and a for a lot of people, shows like “Survivor” or “Big Brother” come to mind. Not to denigrate anyone’s taste, but these are the bottom feeders of “real” TV. I, of course, view on a much higher plain. No, not PBS’s “This Old House.” That’s just turned into welfare for the rich.

I’ve fallen for shows like “Renovation Realities” and “Under Construction.” The first is what happens in real-life DIY: things always take longer and cost more. It’s the anti-”Home Time.” On PBS’s “Home Time,” the hosts usually add a second story to a house in 30 minutes without breaking a sweat. See, anyone can do this!

In “Renovation Realities,” they show how a task, like drilling a fence post hole that should take 30 minutes takes a day and a half because the auger gets stuck in the ground.

In “Under Construction,” the two hosts spend about half the show revealing the secrets of 20 years in the contracting business and the other half of the show exposing the trials and tribulations of running the business.

These shows got me thinking – yes, that’s dangerous, and yes, that’s smoke you’re smelling. How come there aren’t any shows like that about machining? I’m sure there are stories out there as fascinating as putting down a rubber roof membrane.

One reason could be shops are unwilling to reveal their trade secrets. Who want to show how they mill a titanium blank better than their competitors? Once they other guys learn how, they’ll be tougher competition.

Maybe not. I believe we can work together to produce a story – and maybe some video – about a tough task done elegantly, without giving away the store.

So, I’m asking my tens of readers who want to brag about a job to write me at milling@redhottypewriter.com and tell me about it. If I like the story, I’ll contact you and prepare your story for presentation here.

•       •       •

New Products

Nature abhors a vacuum, but shops will love this one
The Smart Vac Workholding System from Pierson Workholding has a universal base that accepts a variety of 8″×12″ interchangeable top plates. The plates come with pre-cut gasket grooves for holding common part shapes, or blank plates so users can create their own gasket grooves contoured to fit unique part outlines.

The Smart Vac Workholding System from Pierson Workholding

The Smart Vac Workholding System from Pierson Workholding

The system has a built-in vacuum pump. The tankless pump does not require any air, vacuum filters, or an external vacuum pump. The pump converts 80 psi of air pressure at 0.8 cfm to 26″ Hg of vacuum force which meets, or exceeds, most competing vacuum systems. The system is sold as a starter package which includes a universal base, a choice of one top plate – styles include a 1″ grid pattern, single concentric-circle, double concentric-circle, multiple-concentric circle, or a blank pattern – an air regulator, table-mounted air valve, and tubing, fittings and clamps. For more information, call 800-352-2894.



Haas now speaks Fadal
The Haas CNC control now translates and runs most Fadal-specific CNC programs, without re-posting or manual editing. It converts Fadal-specific program formats and codes to standard Haas format and codes at the Haas control. The program can then be set up and run like any Haas program.

The process: Access the Fadal converter while loading the program into the Haas control, and follow the on-screen instructions. The converter translates the Fadal program into a Haas program, loading it into memory, ready to run. If anything in the Fadal program isn’t understood, the Haas control highlights that section, letting the user correct ambiguities in the program before operation. The majority of Fadal programs translate into the Haas control edit-free, according to Haas.

Most Fadal programs will run on a Haas CNC machine software version 16.05A – or later.

For more information call 800-331-6746 or visit the Haas website




The eyes of NSK are upon you
NSK Precision America offers two types of photo sensor kits for use with its MCM and MCH Monocarrier linear actuators.
NSK Precision America offers two types of photo sensor kits for use with its MCM and MCH Monocarrier linear actuators

NSK Precision America offers two types of photo sensor kits for use with its MCM and MCH Monocarrier linear actuators

The sensor variety for the Monocarrier lines includes PNP output sensors, as well as NPN output sensors. Both types of sensors are RoHS compliant. The Monocarrier linear actuators integrate multiple products, including ball screws, linear guides, and support bearings. Products in the line offer an all-in-one structure, maintenance-free operation, a compact design, and can be used in assembly, inspection, transporting equipment, and other applications. Call 317-738-5089 for more information or e-mail Don Passero



Sweating the small stuff
The Rush Machinery Inc. Model FC-300 Grinding Oil Filtration System filters grinding oils to 1µ with edge filtration technology.
Rush Machinery's Model FC-300 Grinding Oil Filtration System

Rush Machinery's Model FC-300 Grinding Oil Filtration System

Designed to integrate with most grinding, lapping and honing machines, the system provides continuous filtration, automatic back-flush, and clean oil on demand. An optional cooling system can be incorporated. It has a filter element life expectancy of approximately 15,000 hours; can be customized to fit machines and shop floor layout; is compatible with mineral and synthetic oils; and is available for use with both carbide and HSS.

For more information, call 800-929-3070, or e-mail Ted Hildebrant




A tight fix
The limited-edition Allmatic Titan SC 125 Vise from DAPRA can be used for horizontal and sideways clamping, making it suitable for vertical CNC-controlled milling machines. The high-pressure vise features multi-function jaws. It allows for multiple clamping positions without the need to retool its jaws.
The Allmatic Titan SC 125 Vise from DAPRA

The Allmatic Titan SC 125 Vise from DAPRA

It is suitable for clamping unmachined parts – such as flame- and saw-cut materials – using screw-in gripper inserts, and for clamping parallel pre-machine work pieces by using its step jaws. Through October 15, DAPRA offers the limited-edition vise in a package that includes a torque wrench, side clamps, gripper inserts, and socket screw wrenches. For more information, and full technical specifications, visit DAPRA website, call 800-243-3344, or e-mail the company



Getting real
Geometric Limited released 3DPaintBrush ver. 2.0. The software is a visualization and rendering tool to create near photo-realistic images, animations, and videos from 3D models in real-time. It is used for repurposing of 3D models and creating digital content for architectural and interior design, industrial and product design, presentations and instruction manuals, marketing collateral, and other applications.
Geometric Limited's 3DPaintBrush ver. 2.0 visualization and rendering tool software

Geometric Limited's 3DPaintBrush ver. 2.0 visualization and rendering tool software

Features include ray tracing (beta) for exporting realistic images; lights movement for visualizing and positioning lights in the scene as well as modifying light properties like color and direction, modifications are reflected in real time; export to 3D PDF (beta) and executable file formats for helping users to export their scenes; support for Google SketchUp 7.0, while importing SketchUp files; export to GIF format; and camera views for storing camera views and orientation.

Interested parties can download a 15-day free evaluation version

–30–

Add to Technorati Favorites Top Blogs
Technology
Blog Search Engine Technology Blogs - BlogCatalog Blog Directory


Subscribe to RSS

RSS POSTS RSS COMMENTS